t echnical data sheet tnc 50 ? bulkhead jack 56k611- 271n5 rosenberger hochfrequenztechnik gmbh & co. kg p.o.box 1260 d - 84526 tittmoning germany www.rosenberger.de tel. : +49 8684 18 -0 email : info@rosenberger.de page 1 / 2 dieses dokument ist urheberrechtlich geschtzt this document is protected by copyright rosenberger hochfrequenztechnik gmbh & co. kg rf_35/05.10/6.0 all dimensions are in mm; tolerances according to iso 2768 m - h interface according to iec 60 169 - 17, mil - prf - 39012, din en 122200 documents assembly instruction 5 1 s1 panel piercing b 3 material and plating connector parts material plating center co ntact spring bronze aurodur?, gold plated outer contact brass flash white bronze over silver(e.g. optargen?) body brass flash white bronze over silver(e.g. optargen?) dielectric ptfe gasket silicone
t echnical data sheet tnc 50 ? bulkhead jack 56k611- 271n5 rosenberger hochfrequenztechnik gmbh & co. kg p.o.box 1260 d - 84526 tittmoning germany www.rosenberger.de tel. : +49 8684 18 -0 email : info@rosenberger.de page 2 / 2 dieses dokument ist urheberrechtlich geschtzt this document is protected by copyright rosenberger hochfrequenztechnik gmbh & co. kg rf_35/05.10/6.0 electrical data impedance 50 ? frequency dc to 10 ghz return loss 27 db @ dc to 2 ghz 25 db @ 2 ghz to 4 ghz 20 db @ 4 ghz to 6 ghz insertion loss 0.1 x [ghz] f db insulation resistance 5 g ? center contact resistance 1.5 m ? outer contact resistance 1 m ? test voltage (at sea level) 150 0 v rms working voltage (at sea level) 500 v rms power handling (at 20 c, sea level, vswr 1.0) 80 w @ 2 ghz - limitations are possible due to the used cable type - mechanical data mating cycles 500 c enter contact captivation: axial 15 n coupling te st torque 1.7 nm recommended torque 0.46 nm to 0.69 nm environmental data temperature range -45 c to +85 c thermal shock mil - std - 202, method 107, cond ition b corrosion mil - std - 202, meth od 101, cond ition b vibration mil - std - 202, meth od 204, cond it ion b shock mil - std - 202, meth od 213, cond ition g moisture resistance mil - std - 202, meth od 106 degree of protection (mated pair) iec 60529, ip 67 ( a ssembled in housing ) rohs compliant tooling n/a suitable cables rg 405 /u, ut 85 - m17 weight weight 16 .5 g/pce draft date approved date rev. engineering change number name date inge mhlauer 10/08/04 a . gasteiger 1 7.03.15 f 00 1 5 - 0319 s . huber - siegl 1 7.03.15 while the information has been carefully compiled to the best of our knowledge, nothing is intended as representation or warr anty on our part and no statement herein shall be construed as recommendation to infringe existing patents. in the effort to improve our products, we reserve the right to make changes judged to be necessary.
|
